Rivers

More like this

Carbon Cycle

by Alisa Everett

Thermal & Statistical Physics mbcx8ph2

by Phill Hamnett

Mensuration

by NG SHI WEI, BRYAN N/A

Biomimicry

by Jose SAnchez

Credits

River Systems

Rivers

River Processess

Deposition

When a river does not not have enough energy to erode or transport material. it deposits the load that its carrying.

Transportaton

Four different transport processes

Finer materials such as calcuim carbonate are dissolved in the river and would continue to transport them downstream

Suspension

Finer particles such as silt, clay and sand are carried along the river without touching the river bed.

These materials are held in suspension of the river, they form the greatest proportion of the river's load and give the river a murky appearance

Saltation

Movements of material downstream in a series of bouncing movements

Smaller materials such as coarse sand particles, move along the river by lifting up and dropping to the river bed

Traction

Large sized materials such as boulders, pebbles and gravel are found rolling or sliding along the river bed

When a river has sufficient energy, materials will be carried or transported downstream.

Erosion

Erosion processes

Solution

Rainwater reacts with carbon dioxide and form carbonic acid. Carbonic acid dissolves materials present in the rocks on the river bed and banks.

When a river with carbonic acid flows over limestone, a chemical reacton dissolves the calcium carbonate to form calcuim bicarbonate.

Attrition

The river carries a load of eroded materials which contain rock fragments and other materials

These materials constantly collid woth one another as they move. Over time the materials breaks down into smaller pieces.

Larger rocks are slowly broken down into smaller pieces, and the rough edges have smoothen out.

Corrasion / Abrasion

Rock fragments are dragged along the river bed or against the river banks. This grinding action causes the river channel to widden and deepenas rocks and soil are scrapped off the sides and bottom, and carried away with the water.

Hrdraulic action

As the force or energy of fast moving water is strong enough to loosen the rocks and soil are dislodged and carried down the river. The river channel is eroded as a result.

Lateral erosion

When Rocks and other materials along the sides of the channel are worn away and cause the river channel to become wider.

Vertical erosion

Rocks and other materials on the river bed and other materials on the river bed is removed and causes the channel to deepen

As rivers flow downstream, pieses of rock are removed from the river bed and banks, and moved along the river channel

This causes the river channel to deepen and widen

The energy of a river determines the kind of process that the river moves along its course.

When tthe river has high energy, it is able to erode rocks and other materials in its path.

The river may transport the other materials until it loses its energy and deposits them on the river bed.

Landforms Formed by River Processes

Tributaries

Valleys

Gorges

Waterfalls

Waterfalls are sudden, steep, vertical flows of fast flowing water falling from great heights.

Energy of a River

The energy of the river determines the ability of the river to erode, transport or deposit materials

THe energy of a river changes along its course because the speed and volume of a river changes as its flows through its upper, middle, and lower course

This changes occur as factors that affect the speed and the volume of a river.

Factors affecting the volume of water in a river .

Climate

The climate of the area in which a river flows flows can also affect the volume of water in its channel.

In areas with the distinct wet and dry seasons, the amount of water in the channel fluctuates accourding to the amount of rain fall recieved during each season. In other areas which are generally dry

Permeability of rocks

There is a high tendency for rain failling onto an area with permeable rocks.

A river flowing in an area with less permeable rocks will most probably have a larger volume of water in its channel comapred to a river flowing in an area with more permeable rocks

Size of drainage basin

The bigger the drainage area, the greater will the amount of water in a river because when the drainage are is large, there is more surface area for rain to fall on. The rain flows over the land as surface runoff or seeps into the ground before eventually reaching the river. Smaller drainage areas have less volume of water in a river

Presence of vegetation

Vegetation intercepts rain and allows more water to infiltrate or seep into the ground. Hence abundunt vegetation allows more rain water to infiltrate into the ground, there by reducing flow into the river and the volume of water is smaller. sparce vegetation does not allow much rainwater to infiltrate the ground,thus increasing the flow of surface runoff.

Thus, more surface runoff flows into the river and the volume of the river is larger

Factors involving the speed of a river

Wetted perimeter

River channels can be of various shapes ands sizes the sope of a river channel affects the wetted perimeter, which is the length and breath of the channel in contact with the river's water. If the wetted perimeter is large, more water comes into contact of with the channel. Thus, a lot of friction is generated as the river flows along channel. Friction is genearted as the river flows along a channel. Friction causes the river to flow more slowly. On the other hand ,if the wetted perimeter is small, less friction is generated and hence the river will tend to flow faster.

roughness of the channel

As water flows through a river's channel, it encounter obstacles such as rocks, boulders, underwater vegetation or an uneven river bed. These obstacles cause friction between the water and the channel. This friction will slow down the river flow and reduce the speed of the river. Therefore, a river with a smoother channel will have a higher speed than a river with a rougher channel

Gradient of channel

River flows downhill from a high altitude due to gravity, The speed at whcich a river does so depends very much on the steepness of the channel

If the gradient is steep, the river will flow quickly.

If the gradient is gentle the river will flow slowly.

The energy of a river is determined by the speed of the river and the volume of the river.

If the speed of the river is low, the energy of the river will be low.

When the speed and volume of the river are high, the energy of the river will be high.

Mangemment of River Channels

Bank protection

Re-sectioning

Re-alignment

Channelisation

River System

River System

A river, together with its network of tributaries, lies within a drainage basin.

A watershed separates one drainage basin from the next drainage basin, acting as a boundary which is marked by the crests of hill ridges and mountains

A drainage basin is the land area drained by the main river and its tributaries.

The river ends in a lake,sea,or an ocean

The part of the river that enters the sea is known as the river mouth

It begins at its source

This source usually located in mountains or highlands

This source may be a lake or melting snow

Due to gravity, water always flows downhill from it's source.

As it flows downhill, it travels along a path known as its course

The course of a river may be divided into three parts.

Lower course

The volume of water increase as more tributaries have joined the main river along the way

The river channel is wider than the upper course of the river

The gradient of the river is very gentle

Middle course

The gradient of the slope is not as steep as the upper course.

The river channel is much wider as other smaller rivers or streams may join the main river. These smaller rivers and streams are known as tributaries

Upper course

The upper course is nearer to the source of the river.

The channel tends to be narrow and shallow, only a small amount of water transported.

The gradient or slope of the river is usually steep

A river is a body of water flowing in a channel.