por Woody Wu 2 anos atrás
391
Mais informações
3. The model is distilled knowledge.
2. The model is the backbone language.
1. The model dictates the form of design of the heart of the software.
The subject area to which the user applies the program
Message driven bean
Session bean
Entity bean
Git Objects
Understand Kafka as if you had designed it
Redis设计与实现 第二版
etcd
Zookeeper
Order of events
Vector clock
GPS satellite
NTP
Increase the availability of services
Increase the amount of work that can be handled
Hierarchy of load balancer
Message distributing algorithm
Round-robin
Long tail latency
Two techniques to handle long tail latency
Alternative requests
Hedged requests
"Launch instance" requests to AWS
Timeout tactic
Gateways
Message gateway
Talks to hypervisors which manage VMs on physical computer
Management gateway
Splitting
Data center
Availability zone
Rejion
VIP & VRRP
Layer-7 balancing
Layer-4 balancing
2. System management components
Coordinate the node's individual and collaborative activities
1. Microkernal
A system software over a collection of independent, networked, communicating, and physically separate computational nodes.
7-layer proxy
Great for microservice
Smart balancing
Look into the HTTP header. Also modify the IP header.
4-layer proxy
One tcp connection
Look into the IP header, modify the IP header (NAT)
System architecture
This drawing depicts the DSSA concept. The component class specifications in the reference architecture are realized in multiple system architectures with existing and reengineered components from the DSSA library, generated components, and new components.
A system architecture is an instance of an architecture that meets the specifications in a reference architecture tailored to meet the requirement of a specific system.
Reference architecture
It defines the solution space.
A reference architecture is composed of component class specifications.
A component class specification is an element of the reference architecture that specifies what elements of the architecture do and what their interfaces are.
A reference architecture is a generic set of architecture component specification for a domain (and at least one instance).
Reference requirements
It defines the problem space.
A reference requirement is a generic requirement for the domain.
Domain library
Domain library is a library containing domain-specific software assets for reuse in DSSA process.
DSSA process life cycle (James W. A.)
4. Operate and maintain applications
3. Build applications
2. Populate and maintain library
1. Develop domain-specific base
It's a software life cycle based on the development and use of domain-specific software architectures, components and tools. It is a process life cycle supported by a DSSA library and development environment.
Five stages of DSSA process (Will Tracz)
Architecture realization
5. Produce reusable or gather workproducts
It focuses on populating the domain-specific software architectures (high-level designs) with components that may be used to generate new applications in the problem domain.
Implementation/collection of reusable artifacts (e.g., code, documentation, etc.).
Architecture design and analysis
4. Development domain models/architectures
Goal: come up with generic architectures and to specify the syntax and semantics of the modules or components that form them.
Several domain-specific software architectures may have to be designed, within one application domain, to satisfy the previously identified requirements and constraints.
At each layer of the decomposition, the architecture, subsystem, or module, can be modeled, analyzed and treated as parameterized (configurable) black box.
Top-down decomposition
Modules
Smaller subsystems
Subsystems
Architecture
Similar to high-level design -- emphasis is on defining module/model interfaces and semantics.
Domain anaylysis
3. Define/refine domain specific design and implementation constraints.
Identify and characterize the implementation constraints.
"What" requirements are Stable requirements; "How" requirements are Variable requirements.
Functional requirements are those "What" requirements and constrains are those "How" requirements.
Similar to requirement analysis -- emphasis is on the solution-space.
2. Define/refine domain specific concepts and requirements
More details will be added to the block shown in Stage 1.2 -- define the domain.
Special emphasis on trying to "standardize" and "classify" the basic concepts in the domain.
With special emphasis on "identifying commonalities" and "isolating differences" between applications in the domain.
Goal: compile a dictionary and thesaurus of domain specific terminology.
Similar to requirement analysis -- emphasis is on the problem-space.
1. Define the scope of the domain analysis
Answer a set of questions
3. What general needs are satisfied by applications in the domain?
2. What is the short description of the application domain?
1. What is the name of the domain being modeled?
Output: a list of needs user of applications in this domain require being met.
Focuses on determining what is in the domain of interest and to what ends is this process being applied.
Define what can be accomplished -- emphasis is on the user's needs
Concept
What make DSSA distinct
Case-based reasoning and reverse engineering are no central mechanisms for identifying reusable resources, but rather existing applications are used as vehicle to validate the architectures that are derived, to-down, from generalized user requirements.
Separate problem-space analysis from solution-space analysis
The separation of functional requirements and implementation constraints.
The separation of user needs from system requirements and implementation constraints.
The domain specific software architecture, which we call a reference architecture, is specified by reference requirements, the product of a domain analysis. Application systems are constructed by tailoring the reference architecture to meet the specific system requirements and populating the architecture with components from the DSSA library. -- James W. A.
A domain specific software architecture is, in effect, a multiple-point solution to a set of application specific requirements (which define a problem domain). -- Will Tracz
Formal: A context for patterns of problem elements, solution elements and situation that define mapping between them. -- Will Tracz
Three most important techniques
Entity event modeling
Data flow modeling
Logical data modeling
Builds on a set of methods
Tom DeMarco's structured analysis
Jackson Structured Programming
Yourdon Structured Method
Larry Constantine's structured design
Peter Checkland's soft systems methodology
SSADM is a waterfall method for the analysis and design of information systems. SSADM can be thought to represent a pinnacle of the rigorous document-led approach to system design, and contrasts with more contemporary agile methods such as DSDM or Scrum.
Nigh disipline
Supporting
9. Environment
8. Project management
7. Configuration and change management
Technical
6. Deployment
5. Testing
4. Implementation
3. Analysis and design
2. Requirements
1. Business modeling
Four phases
4. Transition
The released software product
3. Construction
User manual
The software system itself that is ready to be transferred to the end users
2. Elaboration
A preliminary user manual (optional)
Prototypes that demonstrably mitigates each identified technical risks
A development plan for the overall project
Revised business case and risk list
An executable architecture that realizes the architectural significant use cases.
Description of software development process
Description of software architecture
Use case model (80% completion)
1. Inception
Outputs
Project description
Key features
Constraints
The core project requriements
Initial risk assessment
Project plan
A basic use case model
Business case
Success factor
Market recoginizaton
Expected revenue
Business context
PERT / CPM Resource Leveling - Ed Dansereau
Replication
Replication schema
Partial replication
Some fragments of the database may be replicated whereas others may not.
Fully-replicated
System can continue to operate as long as at least one site is up
No replication
Fragmentation and sharding
Allocation schema
Fragmentation schema
Fragmentation types
Mixed fragmentation
Autonomy
Execution autonomy
Communication Autonomy
Design autonomy
It determines the extend to which each individual notes or DBs in a connected DDB can operate independently.
Vertical scalability
Horizontal scalability
Transparency
Fragmentation transparency
Vertical fragmentation
Horizontal fragmentation
Replication transparency
Data organization transparency (distribution or network transparency)
Naming transparency
Location transparency
Reliability
Possible absence of homogeneity among connected nodes
Logical interrelation of connected databases
Connected via computer network
Heterogeneity
Multi-processor parallel
Shared-nothing
Shared disk
Shared memory
ARIES big picture
Rollback
Cascading rollback
If a transaction T is rolled back, any transaction S that has, in the interim, read the value of some data item X written by T must also be rolled back.
After whatever failure happened and before the transaction commits
Two-phase commit protocol
Housekeeping transactions
Aborted transaction list since last checkpoint
Committed transactions list since last checkpoint
Active transaction list
Disk block cache (buffer)
An example WAL (write-ahead logging) protocol with UNDO/REDO log using Steal/No-force approach
2. The committing operation of a transaction cannot be completed until all the REDO-type log records for that transaction have been force-written to disk.
All the logs need to be written before a committing complete
1. The BFIM of an item cannot be overwritten by its AFIM in the database on disk until all UNDO-type log records for the updating transaction up to this point have been force-written to disk.
means log will always be written before the data page
Compare policies
Force/No-force
No-force: a committed transaction can still has pages updated in the cache but have not written to the disk.
Force: all pages updated by a transaction are immediately written to disk before the transaction commits
REDO never needed
Steal/no-steal
No-steal: a cache page updated by a transaction cannot be written to disk before the transaction commits
UNDO never needed
steal: It happens when replace an existing page, which has been updated but whose transaction has not committed.
Cache replace (flush)
Shadowing
Log is not necessary
In-place updating
Log entry types
UNDO-type log entry
Includes the old value (AFIM)
REDO-type log entry
Includes the new value (AFIM)
Write-Ahead logging
The BFIM must be recorded in log entry and flushed to disk before the BFIM is overwritten with the AFIM in the database on disk.
BFIM (before image) and AFIM (after image)
Blocks
Log file blocks
Index file blocks
Data file blocks
Pin/Unpin
Cache directory
Updating policy
The UNDO and REDO operations are required to be idempotent
Steal: Immediate update
Variation
UNDO/NO-REDO
All updates are required to be recorded in the database on disk before a transaction commits
UNDO/REDO
The database may be updated by some operations of a transaction before the transaction reaches its commit point.
No-steal: Deferred update
NO-UNDO/REDO
No physical update of the database on disk until after a transaction commits
Deadlock prevention protocols
Transaction timestamp based protocols
Wound-wait
Wait-die
Not practical protocols
Lock in same order
Lock all as a whole in advance
Deadlock
Example
The wait-for graph
The schedule
Deadlock occurs when each transaction T in a set of two or more transactions is waiting for some item that is locked by some other transaction T'.
Two phase lock protocol (2PL)
2PL can introduce deadlock
If every transaction in a schedule follows the two-phase lock protocol, the schedule is guaranteed to be serializable, obviating the need to test for serializability of schedules.
A transaction can be considered as being divided into two phases: expanding (acquisition) phase and shrinking (release) phase
All locking operations, including the upgrading, must precede the first unlock operation in a transaction.
Nonserialized shedule
Caused by locks released too earlier
When T1, T2 not serialized
When T1, T2 serialized
Shared/Exclusive lock (or read/write lock, multi-mode lock)
Lock conversion
Downgrading
Upgrading
unlock(X)
write_lock(X)
read_lock(X)
A waiting queue associated to each locked data item
Unlocked data items are not traced, so the value of the LOCK variable will be either read_locked or write_locked
Record in lock table:
The LOCK variable has tree values: read-locked, write-locked, unlocked
Binary lock
Operations
unlock_item(X)
lock_item(X)
Data structure
Only needs to maintain records for items that are currently locked in the lock table. Hence the value of the lock variables in lock table will always be 1.
A waiting queue of a data item
Records in lock table:
A binary-valued variable LOCK, associated with each data item in the database
2. Effect of all the transaction operations on the database have been recorded in the log file
Any portion of the log that is in the log buffer but has not been written to the disk yet must now be written to the disk -- force-writing
1. All its operations that access the database have been executed successfully
Log entries
[abort, T]
[commit, T]
[read_item, T, X]
[write_item, T, X, old_value, new_value]
[start_transaction, T]
Log buffers
Log entries are firstly added to the log buffer.
Hold the last part of log entries in main memory
A log is a sequential, append-only that is kept on disk
Database cache
Buffer replacement policy
LRU
Database operations
Write_item(X)
4. Store the updated disk block from the buffer back disk (either immediately or at some late point in time)
3. Copy item X from the program variable named X into its correct location in the buffer
Read_item(X)
3. Copy item X from the buffer to the program variable named X
2. Copy the disk block into main memory buffer. Buffer size = block size
1. Find address of the disk block that contains the item X
Granularity: size of data time
A collection of named data items
A data item has a name
Filename
Block address
Record Id
Examples of data item
A disk block
A file
A database record
Desirable properties
Schedule properties based on serializability
Serializable
Equivalence
Equivalence = Conflict-equivalence: We define a schedule S to be serializable if it is conflict equivalent to some serial schedule S'.
Conflict-equivalence
Two schedules are said to be conflict equivalent if the relative order of any two conflicting operations is the same in both schedules.
For two schedules to be equivalent, the operations applied to each data item affected by the schedules should be applied to that item in both schedules in the same order.
We don't consider result equivalence, it is unstable and depends on other internal status of the schedules.
S1 and S2 are result equivalent if the initial value of X is 100
Saying that a nonserial schedule is serializable is equivalent to saying that it is correct, because it is equivalent to a serial schedule, which is considered correct.
Conflict-serializable schedule
Nonserial schedule
Serial schedule
Schedule properties based on recoverability
Nonrecoverable and recoverable schedules
Ex. nonrecoverable
Sb: r1(X), w1(X), r2(X), r1(Y), w2(X), c2, a1
When T1 aborts, T2, that has committed, has to be rolled back since the value of X that T2 read is no longer valid.
Ex. recoverable
Se: r1(X), w1(X), r2(X), r1(Y), w2(X), a1, a2
This is a cascading rollback because T2 has to be rolled back since it reads data from T1 and T1 aborted.
This is another fix of Sb below by aborting T1 and then T2. Note T2 cannot commit in this case.
Sc: r1(X), w1(X), r2(X), r1(Y), w2(X), c1, c2
This is a fix of Sb below by committing T1 before committing T2
Sa: r1(X), r2(X), w1(X), r1(Y), w2(X), c2, w1(Y), c1
Recoverable
Condition
No transaction T in S commits until all transaction T' that have written some item X that T reads have committed.
Nonrecoverable
A committed transaction may have to be rolled back during recovery
ACID
Durability or permanency
Isolation
Consistency perservation
Atomicity
Transaction schedule (or history)
Complete schedule
Committed projection C(S)
3. For any two conflicting operations, one of the two must occur before the other in the schedule -- partially ordered
2. For any pair of operations from the same transaction Ti, their relative order of appearance in S is the same as the order of appearance in Ti.
1. Operations in S are exactly those in T1, T2, ..., Tn including a commit or abort operation as the last operation for each transaction in the schedule.
Conflicting operations
Write-write conflict
Read-write conflict
Changing the order of conflicting operations in a schedule, will resulted in different outcome.
Conditions
3. At least one of the operations is write_item(X)
2. They access the same item X
1. They belong to different transactions
A schedule S of n transactions T1, T2, ..., Tn is the ordering of the operations of the transactions
Ex2
Ex1
Transaction operations
abort: a
commit: c
end: e
write_item: w
read_item:r
Start: s
State transition diagram of transaction
Either Committed or Aborted
Not allow some operations in a transaction T to be applied to the database while other operations of T are not.
B
Read-write transaction
Read-only transaction
A
Interactively
Embedded
A transaction is an executing program that forms a logical unit of processing
Retrieval
Modification (update)
Deletion
Insertion
Outer join
Full outer join
Right outer join
Left outter join
Inner join
Normal forms cheat sheet
Algorithm: Synthesis info 3NF
Lossless (Nonadditive) join property
Testing algorithm for binary decomposition (NJB property test)
General testing algorithm
The word loss in lossless refers to loss of information, not to loss of tuples. If a decomposition does not have the lossless join property, we may get additional spurious tuples after the PROJECT (π) and NATURAL JOIN (*) operations are applied; these additional tuples represent erroneous or invalid information.
Dependency preservation
It is always possible to find a dependency-preserving decomposition D with respect to F such that each relation Ri in D is in 3NF.
Lost dependency
Ex
If a decomposition is not dependency-preserving, some dependency is lost in the decomposition. To check that a lost dependency holds, we must take the JOIN of two or more relations in the decomposition to get a relation that includes all left- and right-hand-side attributes of the lost dependency, and then check that the dependency holds on the result of the JOIN—an option that is not practical.
Each functional dependency X -> Y specified in F of R either appeared directly in one of the relation schemas Ri in the decomposition D or could be inferred from dependencies that appear in some Ri.
Attribute preservation
Decompose an universal relation schema R = {A1, A2, ..., An} into a set of relation schema D = {R1, R2, ..., Rm}
Minimal cover of a set of dependencies E
Algorithm: finding a minimal cover F from a set of dependencies E
Definition: If F is a minimal cover of E, then
3. We cannot remove any dependency from F and still have a set of dependencies that is equivalent to F
2. We cannot replace any dependency X -> A in F with a dependency Y -> A, where Y is a proper subset of X, and still have a set of dependencies that is equivalent to F.
No extraneous attribute
1. Every dependency in F has a single attribute on the right-hand side.
Keys
Primary key
A choice of (or a designated) candidate key; any other candidate key is an alternate key
Candidate key
A candidate key (or minimal superkey) is a superkey that cannot be reduced to a simpler superkey by removing an attribute.
Superkey
A set of attributes that uniquely identifies each tuple of a relation.
Because superkey values are unique, tuples with the same superkey values must have the same no-key attribute values. That is, non-key attributes are functionally dependent on the superkey.
A set of all attributes is always a superkey (the trivial superkey). Tuples in a relation are by definition unique.
Inference rules
IR6: pseudotransitive rule
{X -> Y, WY -> Z} |= WX -> Z
IR5: Union or additive rule
{X -> Y, X -> Z} |= X -> YZ
IR4: decomposition or projective rule
{X -> YZ} |= X -> Y
IR3: transitive rule
{X -> Y, Y -> Z} |= X -> Z
IR2: augmentation rule
{X -> Y} |= XZ -> YZ
IR1: Reflexive rule (trivial)
If X ⊇ Y, then X -> Y
A functional dependency, denoted by X → Y, between two sets of attributes X and Y that are subsets of R specifies a constraint on the possible tuples that can form a relation state r of R. That constraint is that, for any two tuples t1 and t2 in r that have t1[X] = t2[X], they must also have t1[Y] = t2[Y].
Domain calculus
Tuple calculus
Ex.7
Ex.6
Ex.5
Ex.4
Ex.3
Ex.2
Transforming the Universal and Existential Quantifiers
NOT (∃x)(P(x)) ⇒ NOT (∀x)(P(x))
(∀x)(P(x)) ⇒ (∃x)(P(x))
(∃x) (P(x) AND Q(x)) ≡ NOT (∀x) (NOT (P(x)) OR NOT (Q(x)))
(∃x) (P(x)) OR Q(x)) ≡ NOT (∀x) (NOT (P(x)) AND NOT (Q(x)))
(∀x) (P(x) OR Q(x)) ≡ NOT (∃x) (NOT (P(x)) AND NOT (Q(x)))
(∀x) (P(x) AND Q(x)) ≡ NOT (∃x) (NOT (P(x)) OR NOT (Q(x)))
(∃x) (P(x)) ≡ NOT (∀x) (NOT (P(x)))
(∀x) (P(x)) ≡ NOT (∃x) (NOT (P(x)))
Universal quantifer: (∀t)(F)
If F is a formula, then so is (∀t)(F), where t is a tuple variable. The formula (∀t)(F) is TRUE if the formula F evaluates to TRUE for every tuple (in the universe) assigned to free occurrences of t in F; otherwise, (∀t)(F) is FALSE.
Existential quantifier: (∃t)(F)
If F is a formula, then so is (∃t)(F), where t is a tuple variable. The formula (∃t)(F) is TRUE if the formula F evaluates to TRUE for some (at least one) tuple assigned to free occurrences of t in F; otherwise, (∃t)(F) is FALSE.
Range relation R of tuple variable t: R(t). Ex. EMPLOYEE(e)
Join
Natural join
Natural join (⋈) is a binary operator that is written as (R ⋈ S) where R and S are relations. The result of the natural join is the set of all combinations of tuples in R and S that are equal on their common attribute names.
If the two relations have more than one attribute in common, then the natural join selects only the rows where all pairs of matching attributes match.
If the two relations have no attributes in common, then their natural join is simply their Cartesian product.
Operations from Set theory
Cartesian product (or cross product)
Set difference (or Minus)
Intersection
Union
Project
Select
Commutative
Optimal
If a set of processes cannot be scheduled by RM scheduling, it cannot be scheduled by any other static priority based algorithm.
For harmonic tasks set, the upper bound can be relaxed up to 1.0
LIM n(s^(1/n) - 1) = ln n = 0.693174...
Example of impossible schedule: above the least upper bound
Example of possible schedule: below the least upper bound
Least upper bound
Two types
Dynamic priority
Fixed priority
More frequency task (with shorter period) will always has a higher priority than a less frequency (with longer period) one.
It's preemptive
Video course
21 Top Cyber security Threats
Set associative caches
Directly mapped caches
Fully associative cache and replacement algorithm
CRC
CRC-32 Table Lookup Algorithm
Other examples
Example: polynomial = x^3 + x + 1 (n = 3), message = 11010011101100
Verification
CRC is a linear function: CRC(x + y + z) = CRC(x) + CRC(y) + CRC(z)
Parity bit: generator = x + 1, CRC-1
Polynomial long division
4. Remainder as result
3. Quotient discarded
2. Message as divident
1. Generator polynomial as divisor
CRC-n
Polynomial has n degree, n + 1 items
Hamming code (SED)
Minimal distance is 3
Detect up to two-bits error and correct one-bit error
Some two-bit error can have the same value as some one-bit errors
Hamming code with additonal parity (SECDED)
Can tell difference between one-bit error and two-bit error
Minimal distance is 3 + 1 = 4
Means, if you flip one bit, you have to also flip at least two parity bits to make it a valid code.
Algorithm
Any given bit (data or parity) is included in a unique set of parity bits. So if there is k parity bits, bits from 1 up to 2^k - 1 can be covered. After discounting the k parity bits, 2^k - k - 1 bits remain for use as data.
Visual inspection
Notation: (n, k), where n is block length, ke is message length, and n = 2^r - 1, where r is number of the parity bits
Example: Hamming(7,4) (with r=3)
Relative distance: d/n
Minimum distance d
Rate
R = k/n, where k is message length, n is block length
Hamming Distance
In information theory, the Hamming distance between two strings of equal length is the number of positions at which the corresponding symbols are different. In other words, it measures the minimum number of substitutions required to change one string into the other, or the minimum number of errors that could have transformed one string into the other.
Final step
Proposals
Verifying study impact
Establishing IS-development priorities
A number of criteria (costs and development time, for example) establish the best sequence of system implementation. High-priority subsystems may be analyzed more deeply. This information is given to the sponsor, who determines which information subsystems will be developed.
Define information architecture
To define an organization's information architecture,[4] it is necessary to connect the information subsystems using matrix processes and data classes to find appropriate subsystems. The organization then reorders processes according to the product (or service) life cycle.
Management discussion
Information support
Data class
There are usually about 30–60 data classes, depending on the size of the organization. Future IS will use databases based on these classes
Ex. data classes
Supplier
Invoice
Employee
Customer
Corporation
Process
There are about 40-60 business processes in an organization (depending on its size), and it is important to choose the most profitable ones and the department responsible for a particular process.
Ex. processes
Contract creation
Invoicing
Car rental
Transfer
Types of cohesion (worst to best)
Perfect cohesion (atomic)
Cannot be reduced anymore
Functional cohesion (best)
Parts of a module are grouped because they contribute to a well-defined task of the module.
Sequential cohesion
Grouped together because the output of one part is input of another part.
Communicational/informational cohesion
Grouped because they operate on the same data
Procedural cohesion
Grouped because they always follow a certain sequence of execution.
Temporal cohension
Grouped by when they are processed.
Logical cohesion
Ex.2: All M, V, C routines are in separated folders in a MVC pattern.
Ex.1: all mouse and keyboard inputs handling are grouped together
Parts of a module are grouped together because of they are logically categorized to do the same thing but are different by nature.
Coincidental cohesion
Ex: an utilities class
Parts of a module are grouped together by no reason
Decreasing coupling
Functional design
Each module has only one responsibility and performs that responsibility with the minimum of side effects on other parts.
Types of coupling
Object-oriented programming
Coupling increases between two classes A and B if:
A is a subclass of (or implements) class B
A has a method that references B (via return type of parameter)
A calls on services of an object B
A has an attribute that refers to (is type of) B
Temporal coupling
Subclass coupling
Procedural programming (low to high)
Content coupling
An 'arc' modifies 'point' instance inside a 'line' instance by a way not via its interface or contract.
Common coupling
Several modules have access to the same global data.
External coupling
Two modules share an externally imposed data format, communication protocol, or device interface
Control coupling
Ex: passing a what-to-do flag
Stamp coupling (data structure coupling)
Ex: passing a whole record to a function which needs only one field of it.
Modules share a composite data structure and use only parts of it.
Data coupling
Ex.1
Noncanonical
Ex.2 Minimize -- converted to the dual problem
Ex.1 Minimize, equality constraints
Canonical
Ex.5 Maximize 3x2
Ex.4 Maximize 2x2
Ex.3, Maximize 2x2
Ex.1,2: Minimize/maximize 2x3
DNS message
RFC 4861 Neighbor Discovery - SLAAC - ICMPv6
Cheetsheet
Multicast
Solicited
ff02:0:0:0:0:1:ff00::/104
Transient
ff10::/12
Well known
ff00::/12
Unicast
Unique local
fc00::/7
Loopback
::1/128
Global unicast
Link-local address
RFC7217 address
fe80::/64 + EUI-64
fe80::/10
The six subsystems
WikI
Hi-speed forwarding services for different regions of the network
Also called smart layer, workgroup layer. Routing, filtering, QoS
Access layer devices are usually commodity switching platforms. May or may not provide layer 3 switching.
Proxy
Provide a surrogate or placeholder for another object to control access to it.
Strategy
2. A context forwards requests from its clients to its strategy. Clients usually create and pass a ConcreteStrategy object to the context; thereafter, clients interact with the context exclusively. There is often a family of ConcreteStrategy classes for a client to choose from.
1. Strategy and Context interact to implement the chosen algorithm. A context may pass all data required by the algorithm to the strategy when the algorithm is called. Alternatively, the context can pass itself as an argument to Strategy operations. That lets the strategy call back on the context as required.
Define a family of algorithms, encapsulate each one, and make them interchangeable. Strategy lets the algorithm vary independently from clients that use it.
Interpreter
Part 5
Part 4
3. The interpret operations at each node use the Context to store and access the state of the interpret.
2. Each NonterminalExpression node defines interpret() in terms of interpret on each subexpression. The interpret operation of each TerminalExpression defines the base case in the recursion.
1. The client builds (or is given) the sentence as an abstract syntax tree of NonterminalExpression and TerminalExpression instances. Then the client initializes the Context and invoke the interpret operation.
Abstract syntax tree as an instance of the above class diagram
The regular expression language
Given a language, define a representation for its grammar along with an interpreter that uses the representation to interpret sentences in the language.
Chain of Responsibility
Avoid coupling the sender of a request to its receiver by giving by more than one object a chance to handle the request. Chain the receiving objects and pass the request along the chain until an object handle it.
Decorator
Decorator forwards requests to its Component. It may optionally perform additional operations before and/or after forwarding the request.
Attach additional responsibilities to an object dynamically. Decorators provide a flexibly alternative to subclassing for extending functionality.
Composite
part 1
Clients use the Composite class interface to interact with objects in the composite structure. If the recipient is a Leaf, then the request is handled directly. If the recipient is a Composite, then it usually forward requests to its child components, possibly performing additional operations before and/or after formwarding.
Compose objects into tree structures to represent parts-whole hierarchies. Composite lets client treat individual objects and compositions of objects uniformly.
Bridge
Abstraction forwards client requests to its implementor object.
Decouple an abstraction from its implementation, so the two can vary independently.
Adapter
Client call operations on an Adapter instance. In turn, the adapter calls Adaptee operations that carry out the request.
Convert the interface of a class into another interface clients expect. Adapter lets classes work together that couldn't otherwise because of incompatible interfaces.
Singleton
Clients access a Singleton instance solely through Singleton's Instance() operation.
Ensure a class has only one instance and provide a global point of access to it.
Prototype
Part 3
A client asks a prototype to clone itself.
Specify the kinds of objects to create using a prototypical instance, and create new objects by copying this prototype.
Factory method
Part 2
Part 1
Define an interface for creating an object, but let subclasses decide which class to instantiate. Factory method lets a class defer instantiation to subclasses.
Dependency injection
5. The simplest implementation: manually assembly services and clients in the root place.
4. Full size implementation: The client implemented the injection interface and the injector class takes care the dependencies setup and switching.
3. Pass in the dependency via Setter method. Drawback: how to ensure the Setter was correctly called?
2. Pass the dependency via the Client's constructor. Drawback: hard to change the Service later.
1. Without the injection, the Client directly depends on the Service.
Structure and collaborations
A class accepts objects it requires from an injector instead of creating the objects directly.
Builder
Bicycle
Maze
Part3
Part2
Part1
Collaborations
Each converter class is called a builder in the pattern, and the reader is called the director. Applied to this example, the Builder pattern separates the algorithm for interpreting a textual format (that is, the parser for RTF documents) from how a converted format gets created and represented. This lets us reuse the RTFReader's parsing algorithm to create different text representations from RTF documents—just configure the RTFReader with different subclasses of TextConverter.
Separate the construction of a complex object from its representation, allowing the same construction process to create various representation.
Abstract factory
Sample
Python
Use the class itself as factory
C++
Motivation
Intent
Provide an interface for creating families of related or dependent objects without specifying their concrete classes.
Design pattern is more general than software design pattern
Design pattern is a reusable form of solution to a design problem.
The number of software faults, expressed as faults per thousand lines of code
Failure probability (at input events)
Unlike conventional logic gate diagrams, the gates in a fault tree output probabilities related to the set operations of boolean logic. The probability of gate's output event depends on the input event probabilities.
Example FEMA worksheet
The analysis should always be started by listing the functions that the design needs to fulfill.
Terms
Severity (S): The consequence of the failure mode.
V: Catastrophic
IV: Critical
III: Minor, no damage, light injures.
II: Very minor, no damage, no injures
I: No relevant effect on reliability or safety
Probability (P): the likelihood of the failure occurring.
E: Frequent
D: Reasonably possible
C: Occasional
B: Remote (relatively few failures)
A: Extremely unlikely
Local effect: The failure effect as it applies to the item under analysis.
Failure effect: immediate consequence of a failure on operation, or more generally on the needs for the customer/user that should be fulfilled but now is not, or not fully, fulfilled.
Failure mode: The specific manner or way by which a failure occurs in terms of failure of the part, component, function, equipment, subsystem, or system under investigation.
Failure: The lost of function under stated conditions
General expression
Dual redundant system
f(t) =λ e^(-λt)
R(t) = 1- F(t) = 1 - (1 - e^(-λt)) = e^(-λt)
Under certain engineering assumptions (e.g. besides the above assumptions for a constant failure rate, the assumption that the considered system has no relevant redundancies), the failure rate for a complex system is simply the sum of the individual failure rates of its components, as long as the units are consistent, e.g. failures per million hours. This permits testing of individual components or subsystems, whose failure rates are then added to obtain the total system failure rate
An example from "Computer Architecture - A Quantitative Approach
Availability: MTBF/(MTBF + MTTR)
For network components
Calculation for in-series and in-parallel components
Intuitively, both these formulae can be explained from the point of view of failure probabilities. First of all, let's note that the probability of a system failing within a certain timeframe is the inverse of its MTBF. Then, when considering series of components, failure of any component leads to the failure of the whole system, so (assuming that failure probabilities are small, which is usually the case) probability of the failure of the whole system within a given interval can be approximated as a sum of failure probabilities of the components. With parallel components the situation is a bit more complicated: the whole system will fail if and only if after one of the components fails, the other component fails while the first component is being repaired; this is where MDT comes into play: the faster the first component is repaired, the less is the "vulnerability window" for the other component to fail.
Any practically-relevant calculation of MTBF or probabilistic failure prediction based on MTBF requires that the system is working within its "useful life period", which is characterized by a relatively constant failure rate (the middle part of the "bathtub curve") when only random failures are occurring. Assuming a constant failure rate λ results in a failure density function as follows: f(t)=λ e^-λt, which, in turn, simplifies the above-mentioned calculation of MTBF to the reciprocal of the failure rate of the system: MTBF = 1/λ
In practice, the mean time between failures (MTBF, 1/λ) is often reported instead of the failure rate. This is valid and useful if the failure rate may be assumed constant – only relate to the flat region of the bathtub curve, which is also called the "useful life period".
Bathtub curve: The 'bathtub curve' hazard function (blue, upper solid line) is a combination of a decreasing hazard of early failure (red dotted line) and an increasing hazard of wear-out failure (yellow dotted line), plus some constant hazard of random failure (green, lower solid line)
With reliability function R(t) or density function f(t)
From the definition
The term is used for repairable systems
For exponential failure distribution, the hazard rate h(t) equals λ
Proof
Cumulative distribution function F(t)
it describes the probability of failure (at least) up to and including time t
Sam's speech at goto; conference
5. Implicit high availability
4. Performance capabilities defined in terms other than host size/count.
3. Costs based on precise usage.
2. Self auto-scale and provision based on load (demand)
1. No management of server hosts or server processors
Saga
Choreographed sagas
Orchestrated sagas
Camunda
Zeebe
Rollback and compensating transactions
The first option could be to just not split the data apart in the first place.
Avoid to use distributed transactions
API gateway
Ambassador
The API gateway's main concern is mapping requests from external parties to internal microservices.
Ex. usages
API keys
Rate limiting
Logging
Akin to HTTP proxy
Service mesh
Istio
Linkered
Aren't service mesh smart piple?
Common behaviors we put into service meshes are not specific to any one microservice. No business functionality has leaked to the outside. We are configuring generic things like how request time-outs are handled.
To implement shared behaviors among microservices
Dynamic service registries
Kubernetes
Consul
ZooKeeper
DNS
Coexist incompatible microservice versions
Techniques
Message brokers
Choices
Kalfka
Topics and queues
Topic: event driven
Queue: request-response
Message brokers are intermediaries, often called middleware, that sit between processes to manage communication between them.
GraphQL
REST
Two styles
Event driven (Atom)
Request-response (main)
Six architectural constraints
Code on demand (optional)
Cacheable
Stateless
Client-server
Hypermedia as the engine of application state (HATEOAS)
Resources and its representations
JSON and XML
Once you have a representation of a resource, a Customer for example, then you can make request to create/change/update it. The external representation of a resource is completely decoupled with how it stored internally.
Representational State Transfer: An architecture style where you expose resources (Customer, order, etc.) that can be accessed via a common set of verbs (GET, POST, PUT).
gRPC
Over HTTP
Event-driven
Request-response
Asynchronous
Synchronous
Through common data
Asynchronous non-blocking
Synchronous blocking
Eight principles -- talked on the conference speech
8. Highly observable
7. Isolate failure
6. Customer first
5. Deploy independently
Subtopic
4. Decentralize all the things
3. Hide implementation detail
2. Culture of automation
1. Modelled around business domain
Follow DDD
Event storming
Identify aggregates
Identify commands
Identify events
Mapping aggregates and bounded contexts to microservices
Coarser-grained bounded contexts can in turn contain further bounded contexts.
Both can therefor work well as service boundaries.
As you find your feed, you decide, you decide to break these services into smaller services, you need to remember aggregates themselves don't want to be split aport.
When working out, you want to reduce the number of services you work with, so you should probably target services that encompass entire bounded contexts.
Both can give us units of cohesion with well-defined interfaces with the wider system.
Bounded context
It represents a collection of associated aggregates, with explicit interface to the wider world.
Aggregate
It's a self-contained state machine that focus on a single domain concept.
Ubiquitous language
Good boundary
The prior art can still guide us in how to define good microservice boundary.
Coupling and cohesion are obviously related
A structure is stable if cohesion is strong and coupling is low.
Coupling
When services are loosely coupled, a change to one service should not require a change to another.
Cohesion
So we want to find boundaries within our problem domain that help ensure related behavior is in one place and that communicate with other boundaries as loosely as possible.
The code that changes together, stays together.
Information hiding
By reducing the number of assumptions that one module (or microservice) makes about another, we directly impact the connections between them.
The connections between modules are the assumptions which the modules make about each other.
In essence, microservices are just another form of modular decomposition, albeit one has network-based interaction between the modules and all the associated challenges that brings.
Flexibility
Size
Don't worry about size, instead, focus on two key things:
2. How do you define microservice boundaries to get the most out of them, without everything becoming a horribly coupled mess?
1. How many microservices can you handle?
"As small an interface as possible" -- Chris Richardson.
"A microservice should be as big as my head" -- James Lewis.
When you get into what makes microservices work as a type of architecture, the concept of size is actually one of the least interesting aspects.
How big should a microservice be?
Alignment of architecture and organization
Conway's Law: Organizations which design systems ... are constrained to produce designs which are copies of communication structures of these organizations.
The microservice case
The three-tire case
Owning their own state
If a microservice wants to access data that hold by another microservice, it should go and ask that second microservice for the data.
Should avoid the use of shared database.
Modeled around a business domain
Comparing to layered architecture
By this, we can make it easier to roll out new functionality and recombine microservices in different ways to deliver new functionality to our users.
Independent deployability
Hence, we must make sure:
2. we have explicit, well-defined, and stable contracts between our microservices.
1. our microservices are loosely coupled.
We can make a change to a microservice, deploy it, and release that change to our users, without having to deploy any other microservices.
Link bit error rate viewpoint
Viewpoint language
What is the feasibility of building and maintaining consistency with operational information flow?
What is the bit error rate on a communication link?
Physical interconnect view point
Viewpoint languages
Shared link
Point to point link
Physical identifiable node
What is the feasibility of construction, compliance with standards, and evovability?
What are the physical communications interconnects and their layering among system components?
Behavioral viewpoint
Analytic methods
Partially ordered sets of events
Pi-calculus
Communication sequential processes
Modeling methods
Operations on those entities
States
Processes
Events
Concerns
What are the behaviors of system components? How do they interact?
How do these actions relate (ordering, synchronization, etc.)?
What are the kinds of actions the system produces and participates in?
What are the dynamic behaviors of and within a system?
Structural viewpoint
Perry and Wolf
Elements classes
Connecting elements
Data elements
Processing elements
Architecture = {elements, forms, rationals}
Component architecture
Application Server
The combination of application servers and software components is usually called distributed computing.
Middleware
Categories from QCCSTP
Communication based categories
ORB
MOM
Advantages
Transformation
Routing
Asynchronicity
RPC
Layered categories
集成型中间件
IBM WebSphere
EAI
Workflow
通用型中间件
IBM MQSeres
BEA WebLogic
IONA Orbix
底层中间件
Products
Microsoft CLR
Sun JVM
Technologies
ACE
CLR
JVM
Categories
Machine-time service
Human-time service
Other definitions
Database access services are often characterised as middleware. Some of them are language specific implementations and support heterogeneous features and other related communication features. Examples of database-oriented middleware include ODBC, JDBC and transaction processing monitors.
ObjectWeb
Services that can be regarded as middleware include:
Enterprise services bus
Object request broker (OBR)
Message oriented middleware (MOM)
Data integration
Enterprise application integration (EAI)
The software layer that lies between the operating system and applications on each side of a distributed computing system in a network.
IETF
Middleware includes web servers, application servers, content management systems, and similar tools that support application development and delivery.
In this more specific sense middleware can be described as the dash ("-") in client-server, or the -to- in peer-to-peer.
those services found above the transport (i.e. over TCP/IP) layer set of services but below the application environment (i.e. below application-level APIs).
Middleware is a type of computer software which provides services to software applications beyond those available from the operation system. It can be described as 'software clue'.
Three characteristics
Independent failure of components
Lack of a global clock
Concurrency of components
Distributed computing is a field that studies distributed systems. A distributed system is a system whose components are located on different network computers, which communicate and coordinate their actions by passing messages to one another from any system. The components interact with one another in order to achieve a common goal.
A computer running several software components is often called an application server.
Component models
A component model is a definition of properties that components must satisfy, methods and mechanisms for the composition of components
CORBA
COM/DCOM
EJB
An individual software component is a software package, a web service, a web resource or a module that encapsulates a set of related functions (or data). Components communicates with each other via interfaces.
Anti-pattern: Entity trap
Workflow approach
Event-storming
Actor/Actions
6. Goto 3
5. Restructure components
4. Analyze architecture characteristics
3. Analyze roles and responsibilities
2. Assign requirements to components
1. Identify initial components
Distributed service
Event processor
A layer or subsystem
A wrapper of a collection of code
Independently upgradable
Independently replaable
An individual software component is a software package, a web service, a web resource, or a module that encapsulates a set of related functions (or data).
...
Extract architecture characteristics from requirements
Extract architecture characteristics from domain concerns
references
WiKi
Cross-cutting
Usability/Achievability
Security
Security is a measure of a system's ability to protect data and information from unauthorized access while still providing access to people and systems that are authorized.
while being attacked
Integrity
Confidentiality
Privacy
Legal
Archivability
Accessibility
Structural
Upgradability
Supportability
Portability
Maintainability
Localization
Leveerageability/reuse
Installability
Extensibility
Configurability
Operational
Elasticity
Scalability
Robustness
Reliability/Safety
Recoverability
Continuity
Availability
The degree to which a system is in a specified operational and committable state at the start of a mission, when the mission is called for at an unknown, i.e., a random, time.
MTBF/(MTBF + MTTR)
Availability refers to a property of software, that is there and ready to carry out its task when you need it to be.
Space-based architecture (SBA)
Apache Geode
Block Diagram
Virtualized middleware
Deployment manager
Processing grid
Data grid
Messaging grid
Processing unit
Data replication engine
In-memory data grid cache
Space-based architecture (SBA) is a distributed-computing architecture for achieving linear scalability of stateful, high-performance applications using the tuple space paradigm. It follows many of the principles of representational state transfer (REST), service-oriented architecture (SOA) and event-driven architecture (EDA), as well as elements of grid computing. With a space-based architecture, applications are built out of a set of self-sufficient units, known as processing-units (PU). These units are independent of each other, so that the application can scale by adding more units.
Shared-nothing architecture
Service-oriented (SOA)
Service oriented architecture
Key deference with Microservice
Has an ESB
Service structure
Implementation
Contract
Interface
Type of services
Infrastructure service
Application service
Enterprise service
Functional service
Service requester/consumer
Service broker, register or repository
Service provider
Offspring
SaaS
Mashhups
Cloud computer
Came from
Modular programming
Distributed computing
It promotes loose-coupling between services, separate functions into distinct units or service, which developers make accessible over a network in order to combine and reuse them in the production of applications. These services and their corresponding consumers communicate with each other by passing data in a well-defined, shared format, or by coordinating an activity between two or more services.
Rule-based
Representational state transfer (REST)
Web Service
APIs
Media type
Standard HTTP Methods
DELETE: delete the target resource's state
PUT: Create or replace the state of the target resource with the state defined by the representation enclosed in the request
POST: Let the target resource process the representation enclosed in the request
GET: Get the representation of the target resources's state
Base URI
Architectural constraints
Uniform interface
Code on demand
Layered system
Cacheability
Statelessness
Client-server architecture
REST is a software architectural style that was created to guide the design and development of the architecture for the World Wide Web. REST defines a set of constraints for how the architecture of an Internet-scale distributed hypermedia system, such as the Web, should behave. The REST architectural style emphasises the scalability of interactions between components, uniform interfaces, independent deployment of components, and the creation of a layered architecture to facilitate caching components to reduce user-perceived latency, enforce security, and encapsulate legacy systems. Any web service that obeys the REST constraints is informally described as RESTful. Such a web service must provide its Web resources in a textual representation and allow them to be read and modified with a stateless protocol and a predefined set of operations. This approach allows the greatest interoperability between clients and servers in a long-lived Internet-scale environment which crosses organisational (trust) boundaries.
Reactive architecture
Plug-ins
Media Players
Eclipse IDE
Email clients
Mechanism
The host application provides services which the plug-in can use, including a way for plug-ins to register themselves with the host application and a protocol for the exchange of data with plug-ins. Plug-ins depend on the services provided by the host application and do not usually work by themselves. Conversely, the host application operates independently of the plug-ins, making it possible for end-users to add and update plug-ins dynamically without needing to make changes to the host application. Programmers typically implement plug-ins as shared libraries, which get dynamically loaded at run time.
Plug-in is a software component which adds specific feature to an existed computer program. When a program supports plug-ins, it enables customization.
Pipes and filters
In software engineering, a pipeline consists of a chain of processing elements (processes, threads, coroutines, functions, etc.), arranged so that the output of each element is the input of the next; the name is by analogy to a physical pipeline. Usually some amount of buffering is provided between consecutive elements. The information that flows in these pipelines is often a stream of records, bytes, or bits, and the elements of a pipeline may be called filters; this is also called the pipes and filters design pattern. Connecting elements into a pipeline is analogous to function composition. Narrowly speaking, a pipeline is linear and one-directional, though sometimes the term is applied to more general flows. For example, a primarily one-directional pipeline may have some communication in the other direction, known as a return channel or backchannel, as in the lexer hack, or a pipeline may be fully bi-directional.
Peer-to-Peer
Block diagram
eDonkey
Bittorrent
Compare to Client-Server architecture
A peer-to-peer network is designed around the notion of equal peer nodes simultaneously functioning as both "clients" and "servers" to the other nodes on the network. This model of network arrangement differs from the client–server model where communication is usually to and from a central server. A typical example of a file transfer that uses the client–server model is the File Transfer Protocol (FTP) service in which the client and server programs are distinct: the clients initiate the transfer, and the servers satisfy these requests.
Definnition
Peer-to-peer (P2P) computing or networking is a distributed application architecture that partitions tasks or workloads between peers. Peers are equally privileged, equipotent participants in the application. They are said to form a peer-to-peer network of nodes. Peers make a portion of their resources, such as processing power, disk storage or network bandwidth, directly available to other network participants, without the need for central coordination by servers or stable hosts. Peers are both suppliers and consumers of resources, in contrast to the traditional client–server model in which the consumption and supply of resources is divided.
Monolithic application
Word processor
Microservice architecture
Martin Fowler at GOTO 2014
Jame Lewis, Martin Fowler
Compare to SOA
Grain
SOA and microservice architecture differ in the scope. SOA has an enterprise scope and microservice has an application scope.
Service granularity
If domain-driven design is being employed in modeling the domain for which the system is being built, then a microservice could be as small as an aggregate or as large as an bounded context.
It's bad practice to make services too small as then the runtime overhead and the operational complexity can overwhelm the benefits of the approach.
Services that are dedicated to a single task, such as calling a particular backend system or making a particular type of calculation, are called as atomic services. Similarly, services that call such atomic services in order to consolidate an output, are called as composite services.
There is no consensus or limits on the service granularity as the right answer depends on business and organizational context.
A key step in defining a microservice architecture is figuring out how big an individual microservice has to be.
What it is not
It's not a layer within a monolithic application
What it is
4. Services are small in size, messaging-enabled, bounded by context, autonomously developed, independently deployable, decentralized and built and released with automated processes.
3. Services can be implemented using different programming languages, database, hardware and software environment depending on what fits best.
2. Services are organized around business capabilities
1. Services in a microservice architecture are often processes that communicate over network to fulfill a goal using technology-agnostic protocols such as HTTP.
Layered (or multilayered architecture)
Three-tier
Data tier
Logical tier
Presentation tier
Persistent layer
Business layer
Service layer (Application layer)
Presentation Layer
Event-driven (or implicit invocation)
Resources
The Many Meanings of Event-Driven Architecture • Martin Fowler • GOTO 2017
The Saga Pattern in Microservices (EDA - part 2)
What is Event Driven Architecture? (EDA - part 1)
Pros and Cons
Cons
Inconsistency
Complexity
Performance
Procs
Reverse dependency
Decouple components
JavaScript
Java Swing
Event processing engine (Event sink)
Event channel
Event generator/emitter
What is event?
Structure
Event body
Event header
In EDA system, what is produced, published, propagated, detected or consumed is a (typically asynchronous) message called the event notification, and not the event itself.
A significant change in state
Event driven architecture (EDA) is a software architecture paradigm promoting the production, detection and consuming of, and reaction to events.
Data-centric
Component-based
Client-Server (2-tire, 3-tier, n-tier, cloud computing)
Compare to Peer-to-Peer architecture
Network printing
World Wide Web
Client–server model is a distributed application structure that partitions tasks or workloads between the providers of a resource or service, called servers, and service requesters, called clients. Often clients and servers communicate over a computer network on separate hardware, but both client and server may reside in the same system. A server host runs one or more server programs, which share their resources with clients. A client usually does not share any of its resources, but it requests content or service from a server. Clients, therefore, initiate communication sessions with servers, which await incoming requests.
Blackboard
Blackboard Systems - H. Ycnny Nii
Koala example
Solution-space
Jigsaw example
Simple model
Implementations
Adobe Acrobat OCR text recognization
Heresay II speech recolonization system
Components
3. The control shell, which controls the flow of problem-solving activity in the system. Just as the eager human specialists need a moderator to prevent them from trampling each other in a mad dash to grab the chalk, KSs need a mechanism to organize their use in the most effective and coherent fashion. In a blackboard system, this is provided by the control shell.
Various kinds of information are made globally available to the control modules
The control information can be used by control modules to determine the focus of attention
Criteria are provided to determine when to terminate the process.
Behavior sequence
4. Depending on the information contained in the focus of attention, an appropriate control module prepares it for execution:
c. If the focus of attention is knowledge source and an object, then that knowledge source is ready for execution. The knowledge source is executed together with the context, thus described.
b. If the focus of attention is a blackboard object, then a knowledge source is chosen which will process that object (event-scheduling approach).
a. If the focus of attention is a knowledge source, then a blackboard object is chosen to sever as the context of its invocation (knowledge-scheduling approach).
3. Using information from 1 and 2, a control module selects a focus of attention.
2. Each KS indicates the contribution it can make to the new solution state
1. A KS makes change(s) to blackboard object(s).
A control record also is kept
The focus of attention can be:
3. The combination of the above both.
2. Blackboard objects (i.e., which solution island to pursue next)
1. knowledge sources
The focus of attention indicates the next thing to do
Can be on the blackboard or kept separately
This is a set of control modules that monitor the changes on the blackboard and decide what actions to take next.
The knowledge sources respond opportunistically to changes on the blackboard.
2. The blackboard, a shared repository of problems, partial solutions, suggestions, and contributed information. The blackboard can be thought of as a dynamic "library" of contributions to the current problem that have been recently "published" by other knowledge sources.
The blackboard can have multiple panels
The relationship between objects are denoted by named links.
The objects and their properties define the vocabulary of the solution space.
The objects are hierarchically organized into levels of analysis
The blackboard consists objects from the solution space.
The purpose of the blackboard is to hold computational and solution-state data needed by and produced by the knowledge sources.
1. The software specialist modules, which are called knowledge sources (KSs). Like the human experts at a blackboard, each knowledge source provides specific expertise needed by the application.
Each KS is responsible for knowing the conditions under which it can contribute a solution
It holds preconditions that indicate the condition on the blackboard which must exist before the body of the KS is activated.
The knowledge sources modify only the blackboard or control data structures (that also might be on the blackboard), and only the knowledge sources modify the blackboard.
The knowledge sources are represented as:
Logic assertions
Set of rules
Procedures
The objective of each KS is to contribute information that will lead to a solution to the problem
A KS takes the set of current state on the blackboard and update it as encoded in its specialized knowledge
The domain knowledge needed to solve the problem is partitioned into knowledge sources
Framework
Metaphor
A group of specialists are seated in a room with a large blackboard. They work as a team to brainstorm a solution to a problem, using the blackboard as the workplace for cooperatively developing the solution. The session begins when the problem specifications are written onto the blackboard. The specialists all watch the blackboard, looking for an opportunity to apply their expertise to the developing solution. When someone writes something on the blackboard that allows another specialist to apply their expertise, the second specialist records their contribution on the blackboard, hopefully enabling other specialists to then apply their expertise. This process of adding contributions to the blackboard continues until the problem has been solved.
Illustration
Domain partitioning
Technical partitioning
Behind all the architecture styles, there is a more important aspect: how is an architecture partitioned at it's top level, according to technical or according to domain or business.
3. Reusable 'packages' of design decisions and constraints that are applied to an architecture to induce chosen desirable qualities
2. A family of systems in terms of pattern of structural organization; a vocabulary of components and connectors, with constraints on how they can be combined
1. A special method of construction, characterized by the features that make it notable
Definition of architecture pattern: A general and reusable solution to a commonly occurring problem in software architecture within a given context.
A description of component types and their topology, a description of the pattern of data and control interaction among the components and the informal description of the benefits and drawbacks of using that style.
Document
A scenario-driven iterative process
The idea is that the ASs effect QAs of the system and in turn provide the stakeholders of the system with some level of utility. However, each AS also has cost associated with it and takes time to implement. Given this information, the CBAM can aid the stakeholders in choosing ASs based on the ROI they provide.
Reference
Steps
Reporting
9. Present results
Testing
8. Analyze architectural approaches
7. Brainstorm and prioritize scenarios
Investigation and analysis
6. Analysis architectural approaches
5. Generate quality attribute utility tree
4. Identify architectural approaches
Presentation
3. Present architecture
2. Present business drivers
1. Present the ATM
Outputs -- uncover key architectural decisions
Trade-off points
Trade-off points are parameters in the architecture, any of which hosts to more than one sensitivity point where the measurable quality attributes are affected differently by changing it.
Ex., if changing the speed of the communication channel mentioned above increases the throughput but reduces its reliability, then the speed of that communication channel is a trade off point.
The availability in the system is highly correlated to the reliability of that same communication channel.
The overall throughput in the system is highly correlated to the throughput of particular communication channel.
Sensitivity points are parameters in the architecture to which some measurable quality attribute response is highly correlated.
Risks and non-risks
Risks are architecturally important decisions that have not been made.
Examples
The team has not decided whether they will use a rational or object-oriented database.
The architecture team has not decided what scheduling discipline they will use.
Three concepts
Attribute based architecture style (ABAS)
Analytic approaches
Queuing analysis
Rate monotonic analysis (RMA)
Markov model
A style can be thought as a set of constraints on an architecture -- constraints on component types and their interactions -- and these constraints define the set or family of architectures that satisfy them.
Scenarios
Eliciting and prioritizing
Facilitated brainstorming
Utility truee
Types
Exploratory scenarios
Growth scenarios
Use case scenarios
Quality attribute characterizations
Architecture decisions
Components, connectors and their properties of the architecture
Response
Concrete and measurable or observable quantities of quality requirements
Stimuli
Events that cause the architecture to response or change
Evaluate
To determine if the design decisions satisfactorily address the quality requirements
Elicit
Architectural design decisions
Driving quality attributes
Risk, sensitivity points, tradeoff points
Tradeoff points
A parameter of an architectural construct is host to more than one sensitivity points where the measurable quality attributes are affected differently by changing that parameter.
Sensitivity points
Parameters in an architecture to which some measurable quality attribute response is highly correlated.
Risk
Or decisions have been made but whose consequences have not been fully understood.
Architecturally important decision that have not been made
References
Software architecture = {Elements, Forms, Rationale/Constraints}
